BOLTARON® 6800E
FAR-Rated High Impact Resistant Sheet for Aircraft Interiors
Boltaron ® 6800E sheet, extruded from a proprietary thermoplastic alloy, meets stringent FAR 25.850(a) flammability requirements for aircraft interiors. It also satisfies UL 94 V0 flame test criteria. Its resistance to impacts, stains and cleaning chemicals enhances service life of interior components, and in thermoforming, the sheet maintains uniform wall thickness even in deep draws.
(Note: For aircraft parts larger than 1 sq ft (305 sq mm) requiring an OSU 65/65 rating, please specify Boltaron® 9815E sheet)
Advantages
- Meets FAR 25.853(a) and UL 94 V0 flame test criteria
- Impact and stain resistant
- Wall thickness integrity in deep draw forming
- Full range of colors
- Widest range of textures
- Lot-to-lot consistency
Applications
- Instrument panel housings
- Class dividers
- Bulkhead laminates
- Galley and lavatory components
- Bull noses, gap covers, moldings
- Sidewall and kick panels
- Window reveals
- Seat parts, backs, arm rests
- Tray tables
- Passenger Service Units (PSUs)
- Light housings
- Video monitor shrouds
- Life vest shrouds
- Air ducts
Configurations
Sheet sizes
- Lengths to 120 in. (3,048 mm)
- Widths to 60 in. (1,524 mm)
- Gauges from 0.040 to 0.250 in.
(1.02 - 6.35 mm)
- Custom sizes on request
Colors, textures
- Full range of colors
- Industry's widest range of textures
- 500 lb minimum
BOLTARON® 6800E PROPERTIES, RATINGS
PROPERTY |
TEST METHOD* |
TYPICAL VALUES |
Specific Gravity |
ASTM D792 |
1.300 |
Tensile Strength |
ASTM D638 |
6,000 psi |
41.4 MPa |
Flexural Strength |
ASTM D790 |
9,000 psi |
62.1 MPa |
Flexural Modulus |
ASTM D790 |
340,000 psi |
2,344 MPa |
Izod Impact (notched)
@ 73°F (23°C) |
ASTM D256 |
5 - 10 ft-lb/in. |
267 - 534 J/m |
Hardness Rockwell |
ASTM D785 |
105 |
Heat Deflection (annealed) |
ASTM D648 |
162°F
@ 264 psi |
72°C
@ 1.12 MPa |
Radiant Panel Flame Spread Index
(0.125 in./3.18 mm gauge) |
ASTM E162 |
<17 |
FAR RATINGS |
Flammability
Vertical burn, 60 sec
Vertical burn, 12 sec |
FAR 25.853(a)(i)
FAR 25.853(a)(ii) |
Pass
Pass |
*Independent lab tests. All tests at 73°F (22.8°C) in dry conditions unless otherwise noted.
THERMOFORMING GUIDELINES
Mold Shrinkage |
0.5 - 0.7% |
Forming Temperature |
335 - 365°F |
168 - 185°C |
|
|
|
|