Colors, Patterns and Textures of PVC, PVC-alloy and CPVC Performance Sheet

Print-Friendly PDF

1050

Type 1 PVC Sheet for Fabricating, Machining, Forming

Ultra-high quality, corrosion resistant, fire-rated sheet up to 4 in. (102 mm) thick in gray, white and black for fabricating, machining and thermoforming applications

Boltaron 1050 sheet is a monolithic Type 1 PVC sheet that is free of pits, voids and inclusions, and not subject to delamination associated with competitive heavy gauge sheet.
It is inert to harsh chemicals across the entire pH range, making it suitable for applications in which acids and caustics are handled. Since it does not ionize like stainless steel and high alloys, it is also ideal for applications involving ultrapure water, reagent-grade chemicals or other contamination-sensitive products.
Type 1 PVC Sheet for Fabricating, Machining, Forming

Boltaron 1050 sheet is offered in lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm) and thicknesses from .032 to 4 in. (0.81 to 102 mm).

Smooth on both sides, it is available from stock in dark gray (no minimums), and in white and black (low minimums). It is also available in custom colors, custom textures and custom sizes, and/or with poly masking (low minimums).

The sheet carries a UL 94 V-0 fire rating and conforms to ASTM D-1784 standards, conforming to a wide range of application requirements.

Boltaron 1050 is readily sawn, drilled, tapped, routed and otherwise machined using conventional tools, and can be brake formed (thinner gauges), heat welded, adhesive bonded and mechanically fastened, allowing rapid fabrication of a broad range of high-integrity parts and assemblies.

APPLICATIONS

Fume Hoods and Ducts

Machined Parts

Fume Scrubbers

Acid Etching Machines

Acid Tanks and Linings

FEATURES

Solid, monolithic structure

Free of pits, voids, inclusions

Gauges from .032 to 4 in. (0.81 to 102 mm)

Lengths to 96 in. (2438 mm), widths to 48 in. (1219 mm)

Custom sizes at low minimums

Extreme chemical resistance

Meets UL 94 V-0 and ASTM D-1784 standards

Readily machined using conventional tools

Can be heat welded, adhesive bonded, mechanically fastened

Dark gray color with smooth surface in stock for rapid shipment

Standard white and black colors available (low minimums)

Custom colors and textures available (low minimums)

Type 1 PVC Sheet for Fabricating, Machining, Forming Boltaron 1050 Type 1 PVC is smooth on both sides and offered in thicknesses up to 4 in. 102 mm) in standard dark gray, white and black colors.

PROPERTIES/RATINGS

PROPERTY TEST METHOD TYPICAL VALUES

Mechanical Specific gravity ASTM D-792 1.37

Tensile strength (PSI) ASTM D-638 7,400

Elongation Ultimate (%) ASTM D-638 132

Yield (%) ASTM D-638 3.5

Modulus of Elasticity (PSI) ASTM D-638 4.0x10⁵

Flexural strength (PSI) ASTM D-790 12,000

Flexural modulus (PSI) ASTM D-790 4.2x10⁵

Izod impact (Ft. lbs./in. of notch) ASTM D-256 1-3

Hardness Rockwell R ASTM D-785 116

Hardness Shore D ASTM D-2240 82

Compression Strength (PSI) ASTM D-695 10,830

Shear Strength (PSI) ASTM-D-732 9,240

Water Absorption 24 hrs. (%) ASTM D-570 0.032

Thermal Vicat Softening Point (°C) ASTM D-1525 85

Thermal Expansion (in/in°C) ASTM D-696 5.31x10^-5

Heat Deflection (°F) 264 PSI (annealed) ASTM D-648 165

Thermal Conductivity (BTU/HR/FT/F/in.) ASTM C-177 0.72

Specific Heat (CAL/GM/°C) ASTM-C-351 0.20

Electrical Dielectric Strength (Volts/Mil.) ASTM D-149 552

Volume Resistivity (0hms/cm)x10¹⁴ ASTM D-257 1.48

Dielectric Constant (60Hz) ASTM D-150 2.910

Dissipation Factor (60Hz) ASTM D-150 0.018

Loss Index ASTM D-150 0.051

Flammability UL UL 94 V-0¹

¹ Values based on minimum thickness of .032", UL File # E54688

AVAILABILITY

Standard Colors: Dark Gray (2079) (stock)
White (1150) & Black (2803) (min. order required)
Custom Colors: Upon Request (min. order required)
Gauges: .032 to 4.00 in. (102 mm)
Width: 48 in. (1219 mm)
Length: 96 in. (2438 mm)
Custom Sizes: Upon request
Standard Texture: Industrial Smooth (Both Sides)
Custom Textures: Upon Request
Poly Masking: (Upon Request)

OTHER BOLTARON GRADES OF PVC SHEET:

Numerous grades of high performance PVC/acrylic alloys also available for thermoforming and fabricating applications

LIMITATION OF WARRANTY
The application suggestions, specifications and other data described here are based upon experience and information that is believed, by BOLTARON Inc., to be reliable. However, BOLTARON Inc. makes no express or implied warranty that BOLTARON 1050 will perform in accordance with such specifications in any particular circumstance. Therefore, ALL EXPRESS OR IMPLIED WARRANTIES IN CONNECTION WITH BOLTARON 1050, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY DISCLAIMED. The prospective user should determine the suitability of BOLTARON 1050 and the application suggestions before actual application.