NX1
Küçültülmüş boyutlu kontrolörde Bilgi ve Verimlilik
NX1 serisi modüler makine kontrolörü; lojik kontrolü, hareket ve bilgi fonksiyonlarını sunar. Üretim ve IT dünyalarını bir araya getiren NX1, aracı yazılımı engellerken mühendislik ve bakım işlemlerini azaltır.
- IoT Uyumlu: OPC UA sunucusu standart özellik olarak bulunur, farklı yapılar desteklenir
- Doğrudan veri tabanı bağlantısı: Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird ve PostgreSQL sunucusu için SQL Client
- Veri işleme için geniş bellek. Değişkenler için 33,5 MB
- Pilsiz kontrolör
- Döngü süresi: 1 ms'den itibaren
- Maks. 12 eksen (8 senkronize hareket ekseni ve 4 PTP)
- Yerel ve uzak G/Ç, EtherCAT aygıtları ve hareket kontrolü için tek bir eşsiz ve senkronize döngü
- V2.0'daki doğrudan veri tabanı bağlantısı, kayıtlı prosedür aramaları ve güvenli haberleşme fonksiyonlarıyla geliştirildi
- Doğrudan veri tabanı bağlantısı: Microsoft SQL, Oracle, IBM DB2, MySQL, Firebird ve PostgreSQL sunucusu için SQL Client
- Multi-tasking kontrolör
- Genişletilmiş ağ bağlantısı, 2 Ethernet portu + 1 EtherCAT
- Emniyet ve IO-Link master dahil 32 adede kadar yerel NX ünitesi
- 64 adede kadar EtherCAT nodu (400xNX ünitesi) desteği
- Kablo bozulması veya cihaz hatası durumunda haberleşme ve kontrolü devam ettirmek için EtherCAT Halka topolojisi desteklenir
Özellikler ve sipariş bilgisi
Ordering information
NX1 series CPU units
CPU | Program capacity | Variables capacity | Number of axes | Functionalities | Order code | |||||
---|---|---|---|---|---|---|---|---|---|---|
Real axes | Motion control servo axes | Single-axis position control axes | Sequence | OPC UA | Motion | DB connection | ||||
NX102 | 5 MB |
1.5 MB: Retained 32 MB: Not retained |
12 axes | 8 axes | 4 axes | NX102-1220 | ||||
– |
NX102-1200 | |||||||||
8 axes | 4 axes | NX102-1120 | ||||||||
– | NX102-1100 | |||||||||
6 axes | 2 axes | NX102-1020 | ||||||||
– | NX102-1000 | |||||||||
4 axes | 0 axes | – | NX102-9020 | |||||||
– | – | NX102-9000 |
The end cover unit NX-END02 is included with the CPU unit.
NX I/O units (local and remote I/O)
Up to 32 local NX I/O units can be connected to an NX1 CPU unit.
Communication and control units
Module Type | Protocol | Connection | Specification | Width | Order code |
---|---|---|---|---|---|
Communication coupler | EtherCAT Slave |
2 RJ45 ports (in + out) |
Up to 63 I/O units. Max. 1,024 bytes in + 1,024 bytes out Supports distributed clock I/O power supply up to 10 A |
46 mm | NX-ECC203 |
Safety controller | FSoE Protocol | 128 Safety connections | For up to 1,024 safety I/O points | 30 mm | NX-SL3500 |
32 Safety connections | For up to 256 safety I/O points | NX-SL3300 |
IO-Link master unit
Module Type | No. of ports | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|
IO-Link master unit | 4 | Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-ILM400 |
For more detailed information about IO-Link master unit, refer to “IO-Link master datasheet (I191E-EN)”.
Digital I/O units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
|
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AC Digital Input | 4 inputs, 200 to 240 VAC, 50/60 Hz | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-IA3117 | – | ||||||||||||||||||||||||||||||||||||
Safety Digital Input | 4 inputs + 2 test outputs | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SIH400 | – | ||||||||||||||||||||||||||||||||||||
8 inputs + 2 test outputs | Screwless push-in (NX-TBA162) | NX-SID800 | – | |||||||||||||||||||||||||||||||||||||||
DC Digital Input | 4 inputs, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA122) | 12 mm | NX-ID3444 | NX-ID3344 | ||||||||||||||||||||||||||||||||||||
High-speed Synchronous/Free Run | NX-ID3443 | NX-ID3343 | ||||||||||||||||||||||||||||||||||||||||
Synchronous/Free Run | NX-ID3417 | NX-ID3317 | ||||||||||||||||||||||||||||||||||||||||
8 inputs, 2-wire connection | Screwless push-in (NX-TBA162) | NX-ID4442 | NX-ID4342 | |||||||||||||||||||||||||||||||||||||||
16 inputs, 1-wire connection | NX-ID5442 | NX-ID5342 | ||||||||||||||||||||||||||||||||||||||||
1 × 20-pin MIL connector | 30 mm | NX-ID5142-5 | same | |||||||||||||||||||||||||||||||||||||||
M3 screw | NX-ID5142-1 | same | ||||||||||||||||||||||||||||||||||||||||
32 inputs, 1-wire connection | 1 × 40-pin MIL connector | NX-ID6142-5 | same | |||||||||||||||||||||||||||||||||||||||
1 × 40-pin Fujitsu connector | NX-ID6142-6 | same | ||||||||||||||||||||||||||||||||||||||||
DC Digital I/O | 16 inputs + 16 outputs 0.5 A, 1-wire connection + common | Synchronous/Free Run | 2 × 20-pin MIL connector | 30 mm | NX-MD6256-5 | NX-MD6121-5 | ||||||||||||||||||||||||||||||||||||
2 × 24-pin Fujitsu connector | – | NX-MD6121-6 | ||||||||||||||||||||||||||||||||||||||||
DC Digital Output | 2 outputs 0.5 A, 3-wire connection | High-speed Synchronous Time Stamp | Screwless push-in (NX-TBA082) | 12 mm | NX-OD2258 | NX-OD2154 | ||||||||||||||||||||||||||||||||||||
4 outputs 0.5 A, 3-wire connection | High-speed Synchronous/Free Run | Screwless push-in (NX-TBA122) | NX-OD3257 | NX-OD3153 | ||||||||||||||||||||||||||||||||||||||
Synchronous/Free Run | NX-OD3256 | NX-OD3121 | ||||||||||||||||||||||||||||||||||||||||
4 outputs 2 A/point, 8 A total, 3-wire connection | Screwless push-in (NX-TBA162) | NX-OD3268 | – | |||||||||||||||||||||||||||||||||||||||
8 outputs 0.5 A, 2-wire connection | NX-OD4256 | NX-OD4121 | ||||||||||||||||||||||||||||||||||||||||
16 outputs 0.5 A, 1-wire connection | NX-OD5256 | NX-OD5121 | ||||||||||||||||||||||||||||||||||||||||
1 × 20-pin MIL connector | 30 mm | NX-OD5256-5 | NX-OD5121-5 | |||||||||||||||||||||||||||||||||||||||
M3 screw | NX-OD5256-1 | NX-OD5121-1 | ||||||||||||||||||||||||||||||||||||||||
32 outputs 0.5 A, 1-wire connection | 1 × 40-pin MIL connector | NX-OD6256-5 | NX-OD6121-5 | |||||||||||||||||||||||||||||||||||||||
1 × 40-pin Fujitsu connector | – | NX-OD6121-6 | ||||||||||||||||||||||||||||||||||||||||
Safety Digital Output | 2 outputs, 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-SOH200 | – | ||||||||||||||||||||||||||||||||||||
4 outputs, 0.5 A | NX-SOD400 | – | ||||||||||||||||||||||||||||||||||||||||
Relay Digital Output | 2 outputs, N.O., 2.0 A | Free Run | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2633 | – | ||||||||||||||||||||||||||||||||||||
8 outputs, N.O., 2.0 A | Screwless push-in (NX-TBA082 × 2) | 24 mm | NX-OC4633 | – | ||||||||||||||||||||||||||||||||||||||
2 outputs, N.O.+ N.C., 2.0 A | Screwless push-in (NX-TBA082) | 12 mm | NX-OC2733 | – |
Analog I/O units
Module type | Signal type | Performance, I/O Refresh Mode | Channels | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Temperature Sensor -Input | Thermocouple type B,E,J,K,L,N,R,S,T,U,WRe5-26,PLII |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in terminal block(s) with cold junction sensor, calibrated -individually at the factory | 12 mm | NX-TS2101 |
4 | 24 mm | NX-TS3101 | ||||
0.01°C resolution, 10 ms/unit Free Run |
2 | 12 mm | NX-TS2102 | |||
4 | 24 mm | NX-TS3102 | ||||
0.001°C resolution, 60 ms/unit Free Run |
2 | 12 mm | NX-TS2104 | |||
4 | 24 mm | NX-TS3104 | ||||
RTD type Pt100 (3-wire), Pt1000, Ni508.4 |
0.1°C resolution, 200 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2201 | |
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3201 | |||
0.01°C resolution, 10 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2202 | ||
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3202 | |||
0.001°C resolution, 60 ms/unit Free Run |
2 | Screwless push-in (NX-TBA162) | 12 mm | NX-TS2204 | ||
4 | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TS3204 | |||
Analog Input | 4 to 20 mA single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-AD2203 |
4 | Screwless push-in (NX-TBA122) | NX-AD3203 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4203 | ||||
4 to 20 mA differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2204 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3204 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4204 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2208 | |||
4 | Screwless push-in (NX-TBA122) | NX-AD3208 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4208 | ||||
–10 to 10 V single ended |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2603 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3603 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4603 | ||||
–10 to 10 V differential |
1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2604 | ||
4 | Screwless push-in (NX-TBA122) | NX-AD3604 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4604 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-AD2608 | |||
4 | Screwless push-in (NX-TBA122) | NX-AD3608 | ||||
8 | Screwless push-in (NX-TBA162) | NX-AD4608 | ||||
High-Speed Analog Input | –10 to 10 V, –5 to 5 V, 0 to 10 V, 0 to 5 V, 1 to 5 V, 0 to 20 mA, 4 to 20 mA differential |
–10 to 10 V or –5 to 5 V: 1/64000 Other input range: 1/32000 5 µs/channel Synchronous |
4 (NPN) | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-HAD401 |
4 (PNP) | NX-HAD402 | |||||
Analog Output | 4 to 20 mA | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | 12 mm | NX-DA2203 |
4 | Screwless push-in (NX-TBA122) | NX-DA3203 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2205 | |||
4 | Screwless push-in (NX-TBA122) | NX-DA3205 | ||||
–10 to 10 V | 1/8000 resolution, 250 µs/channel Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2603 | ||
4 | Screwless push-in (NX-TBA122) | NX-DA3603 | ||||
1/30000 resolution,10 µs/channel Synchronous/Free Run |
2 | Screwless push-in (NX-TBA082) | NX-DA2605 | |||
4 | Screwless push-in (NX-TBA122) | NX-DA3605 |
Temperature control units
Module type | Conversion time, I/O Refresh Mode |
Channels | Input type | Output type | Output capacity | CT Input capacity | Control type | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|---|---|---|---|
Temperature control |
50 ms Free run |
2 | Multi-input (Thermocouple and Resistance thermometer) |
Voltage output (for driving SSR) | 2 points | 2 points | Standard | Screwless push-in (NX-TBA162) | 12 mm | NX-TC2405 |
– | NX-TC2406 | |||||||||
4 points | Heating and Cooling | NX-TC2407 | ||||||||
Linear current output | 2 points | Standard | NX-TC2408 | |||||||
4 | Voltage output (for driving SSR) | 4 points | 4 points | Standard | Screwless push-in (NX-TBA162 + NX-TBB162) |
24 mm | NX-TC3405 | |||
– | NX-TC3406 | |||||||||
8 points | Heating and Cooling | NX-TC3407 | ||||||||
Linear current output | 4 points | Standard | NX-TC3408 |
Heater burnout detection units
Module type | Channels, signal type | Control output | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Heater burnout detection | 4 CT inputs 4 control outputs |
NPN, 12 to 24 VDC 0.1 A/point, 0.4 A/unit |
Free Run | Screwless push-in (NX-TBA162) | 12 mm | NX-HB3101 |
PNP 24 VDC 0.1 A/point, 0.4 A/unit |
NX-HB3201 |
Load cell input unit
Module type | Specifications | Excitation voltage/input range | I/O refresh method | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|---|---|
Load cell input | 1 load cell input, 125 µs conversion cycle | 5 VDC ±10%/–5 to 5 mV/V | Synchronous/ Free Run |
Screwless push-in (NX-TBC162) | 12 mm | NX-RS1201 |
Position control units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Encoder Input | 1 SSI encoder, 2 MHz | Synchronous/Free Run | Screwless push-in (NX-TBA122) | 12 mm | NX-ECS112 | – | ||||||||||||||||||||||||||||||||||||
2 SSI encoders, 2 MHz | NX-ECS212 | – | ||||||||||||||||||||||||||||||||||||||||
1 incremental encoder line driver 4 MHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA122 + NX-TBB122) |
24 mm | NX-EC0142 | NX-EC0132 | ||||||||||||||||||||||||||||||||||||||
1 incremental encoder open collector 500 kHz + 3 Digital Inputs (1 µs) | Screwless push-in (NX-TBA162) | 12 mm | NX-EC0122 | NX-EC0112 | ||||||||||||||||||||||||||||||||||||||
2 incremental encoders open collector 500 kHz | Screwless push-in (NX-TBA122) | NX-EC0222 | NX-EC0212 | |||||||||||||||||||||||||||||||||||||||
Pulse Output | 1 Pulse Up/Down or Pulse/Direction open collector 500 kHz + 2 Digital -Inputs + 1 Digital Output (1 µs) | Synchronous | Screwless push-in (NX-TBA162) | 12 mm | NX-PG0122 | NX-PG0112 | ||||||||||||||||||||||||||||||||||||
2 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 1 × 34-pin MIL connector | 30 mm | NX-PG0242-5 | NX-PG0232-5 | ||||||||||||||||||||||||||||||||||||||
4 pulse line driver 4 MHz + 5 digital inputs per channel + 3 digital outputs per channel | 2 × 34-pin MIL connector | NX-PG0342-5 | NX-PG0332-5 |
Serial communication interface units
Module type | Channels, Signal type | Performance
2 ,
I/O Refresh ModeDigital I/O performance
Order codes are for PNP-type signals (positive switching, 0 V common). Most models are also available as NPN-type (negative switching, 24 V common). Inputs of MIL-connector versions can be used as NPN or PNP. |
Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code | NPN-type
2
Order codes are for PNP-type signals
(positive switching, 0 V common). Most models are also available
as NPN-type (negative switching, 24 V common). Inputs of MIL-connector
versions can be used as NPN or PNP. |
||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Serial Communication | 1 × RS-422A/485 | Free Run | Screwless push-in (NX-TBC162) | 12 mm | NX-CIF105 | – | ||||||||||||||||||||||||||||||||||||
1 × RS-232C | NX-CIF101 | – | ||||||||||||||||||||||||||||||||||||||||
2 × RS-232C | 9-pin D-sub | 30 mm | NX-CIF210 | – |
Other units
Module type | Description | Connection type
2
Units with screwless push-in
connections are supplied with the appropriate terminal connector.
Units with MIL/Fujitsu connectors are supplied without matching
plugs. |
Width | Order code |
---|---|---|---|---|
Power Unit | NX bus power supply unit, 24 V DC input, non-isolated | Screwless push-in (NX-TBC082) | 12 mm | NX-PD1000 |
I/O power feed unit, for separation of power groups, up to 10 A | Screwless push-in (NX-TBA082) | NX-PF0730 | ||
I/O power connection unit, 16 × IOV | Screwless push-in (NX-TBA162) | NX-PC0020 | ||
I/O power connection unit, 16 × IOG | NX-PC0010 | |||
I/O power connection, 8 × IOV + 8 x IOG | NX-PC0030 | |||
System Units and -Accessories | Grounding terminal, 16 points | Screwless push-in (NX-TBC162) | NX-TBX01 | |
End cover (included with Communication Coupler) | – | NX-END01 | ||
Replacement front connector with 8 wiring terminals (marked A+B) | Screwless push-in | NX-TBA082 | ||
Replacement front connector with 12 wiring terminals (marked A+B) | NX-TBA122 | |||
Replacement front connector with 16 wiring terminals (marked A+B) | NX-TBA162 | |||
Replacement front connector with 12 wiring terminals (marked C+D) | NX-TBB122 | |||
Replacement front connector with 16 wiring terminals (marked C+D) | NX-TBB162 | |||
Replacement front connector with 8 wiring terminals (marked A+B+FG) | NX-TBC082 | |||
Replacement front connector with 16 wiring terminals (marked A+B+FG) | NX-TBC162 | |||
DIN rail insulation spacers, set of 3 pcs | – | NX-AUX01 | ||
30 Unit pins + 30 Terminal keying pins, to prevent mismatch of unit and terminal block (one set is enough for 10 units) | – | NX-AUX02 |
Recommended EtherCAT and EtherNet/IP communication cables
Item | Manufacturer | Color | Cable length (m) | Order code | ||
---|---|---|---|---|---|---|
EtherCAT cable |
Cat 5e, AWG22, 2-pair cable M12/Smartclick connectors Improved shield for EtherCATcommunications |
Standard type Cable with connectors on both ends (M12 straight/M12 straight) |
OMRON | Black | 0.5 | XS5W-T421-BM2-SS |
1 | XS5W-T421-CM2-SS | |||||
2 | XS5W-T421-DM2-SS | |||||
3 | XS5W-T421-EM2-SS | |||||
5 | XS5W-T421-GM2-SS | |||||
10 | XS5W-T421-JM2-SS | |||||
Rugged type Cable with connectors on both ends (M12 straight/RJ45) |
Black | 0.5 | XS5W-T421-BMCSS | |||
1 | XS5W-T421-CMC-SS | |||||
2 | XS5W-T421-DMC-SS | |||||
3 | XS5W-T421-EMC-SS | |||||
5 | XS5W-T421-GMC-SS | |||||
10 | XS5W-T421-JMC-SS | |||||
Ethernet/EtherCAT patch cable |
Cat 6a, AWG27, 4-pair cable Cable sheath material: LSZH
2 ,The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use.
2
This cable is available
in yellow, green and blue colors. |
Standard type Cable with connectors on both ends (RJ45/RJ45) |
Yellow | 0.2 | XS6W-6LSZH8SS20CM-Y | |
0.3 | XS6W-6LSZH8SS30CM-Y | |||||
0.5 | XS6W-6LSZH8SS50CM-Y | |||||
1 | XS6W-6LSZH8SS100CM-Y | |||||
1.5 | XS6W-6LSZH8SS150CM-Y | |||||
2 | XS6W-6LSZH8SS200CM-Y | |||||
3 | XS6W-6LSZH8SS300CM-Y | |||||
5 | XS6W-6LSZH8SS500CM-Y | |||||
7.5 | XS6W-6LSZH8SS750CM-Y | |||||
10 | XS6W-6LSZH8SS1000CM-Y | |||||
15 | XS6W-6LSZH8SS1500CM-Y | |||||
20 | XS6W-6LSZH8SS2000CM-Y | |||||
Green | 0.2 | XS6W-6LSZH8SS20CM-G | ||||
0.3 | XS6W-6LSZH8SS30CM-G | |||||
0.5 | XS6W-6LSZH8SS50CM-G | |||||
1 | XS6W-6LSZH8SS100CM-G | |||||
1.5 | XS6W-6LSZH8SS150CM-G | |||||
2 | XS6W-6LSZH8SS200CM-G | |||||
3 | XS6W-6LSZH8SS300CM-G | |||||
5 | XS6W-6LSZH8SS500CM-G | |||||
7.5 | XS6W-6LSZH8SS750CM-G | |||||
10 | XS6W-6LSZH8SS1000CM-G | |||||
15 | XS6W-6LSZH8SS1500CM-G | |||||
20 | XS6W-6LSZH8SS2000CM-G | |||||
Cat 5e, AWG26, 4-pair cable Cable sheath material: PUR
2
The lineup features
low smoke zero halogen cables for in-cabinet use and PUR cables
for out-of-cabinet use. |
Standard type Cable with connectors on both ends (RJ45/RJ45) |
Green | 0.5 | XS6W-5PUR8SS50CM-G | ||
1 | XS6W-5PUR8SS100CM-G | |||||
1.5 | XS6W-5PUR8SS150CM-G | |||||
2 | XS6W-5PUR8SS200CM-G | |||||
3 | XS6W-5PUR8SS300CM-G | |||||
5 | XS6W-5PUR8SS500CM-G | |||||
7.5 | XS6W-5PUR8SS750CM-G | |||||
10 | XS6W-5PUR8SS1000CM-G | |||||
15 | XS6W-5PUR8SS1500CM-G | |||||
20 | XS6W-5PUR8SS2000CM-G | |||||
Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (RJ45/RJ45) |
OMRON | Grey | 0.3 | XS5W-T421-AMD-K | |
0.5 | XS5W-T421-BMD-K | |||||
1 | XS5W-T421-CMD-K | |||||
2 | XS5W-T421-DMD-K | |||||
3 | XS5W-T421-EMD-K | |||||
5 | XS5W-T421-GMD-K | |||||
10 | XS5W-T421-JMD-K | |||||
15 | XS5W-T421-KMD-K | |||||
Rugged type Cable with connectors on both ends (M12 straight/RJ45) |
Grey | 0.3 | XS5W-T421-AMC-K | |||
0.5 | XS5W-T421-BMC-K | |||||
1 | XS5W-T421-CMC-K | |||||
2 | XS5W-T421-DMC-K | |||||
3 | XS5W-T421-EMC-K | |||||
5 | XS5W-T421-GMC-K | |||||
10 | XS5W-T421-JMC-K | |||||
15 | XS5W-T421-KMC-K | |||||
Ethernet/EtherCAT patch cable |
Cat 5e, AWG22, 2-pair cable |
Rugged type Cable with connectors on both ends (M12 L right angle/RJ45) |
OMRON | Grey | 0.3 | XS5W-T422-AMC-K |
0.5 | XS5W-T422-BMC-K | |||||
1 | XS5W-T422-CMC-K | |||||
2 | XS5W-T422-DMC-K | |||||
3 | XS5W-T422-EMC-K | |||||
5 | XS5W-T422-GMC-K | |||||
10 | XS5W-T422-JMC-K | |||||
15 | XS5W-T422-KMC-K | |||||
Ethernet -installation -cable | Cat 5, SF/UTP, 4 × 2 × AWG 24/1 (solid core), Polyurethane (PUR) | Weidmüller | Green | 100 | WM IE-5IC4x2xAWG24/1-PUR | |
Cat 5, SF/UTP, 4 × 2 × AWG 26/7 (stranded core), Polyurethane (PUR) | Green | 100 | WM IE-5IC4x2xAWG26/7-PUR | |||
Connectors |
RJ45 metallic connector For AWG22 to AWG26 |
– | – | WM IE-T0-RJ45-FH-BK | ||
RJ45 plastic connector For AWG22 to AWG24 |
OMRON | – | – | XS6G-T421-1 | ||
RJ45 socket | DIN-rail mount socket to terminate installation cable in the -cabinet | Weidmüller | – | – | WM IE-T0-RJ45-FJ-B |
Please be careful while cable processing, for EtherCAT, connectors on both ends should be shield connected and for EtherNet/IP, connectors on only one end should be shield connected.
Accessories
Appearance | Specifications | Order code | ||
---|---|---|---|---|
EtherCAT junction slaves |
3 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.08 A |
GX-JC03 | ||
6 ports Power supply voltage: 20.4 to 28.8 VDC (24 VDC –15 to 20%) Current consumption: 0.17 A |
GX-JC06 | |||
Industrial switching hubs (for EtherNet/IP and Ethernet) |
Quality of Service (QoS): EtherNet/IP control data priority. Failure detection: Broadcast storm and LSI error detection 10/100 BASE-TX, Auto-Negotiation Current consumption: 0.22 A |
3 ports Power supply connector included |
W4S1-03B | |
5 ports Power supply connector included |
W4S1-05B | |||
5 ports Power supply connector and connector for informing error -included |
W4S1-05C | |||
SD memory card | 2 GB | HMC-SD291 | ||
4 GB | HMC-SD491 | |||
DIN track | Length: 0.5 m; height: 7.3 mm | PFP-50N | ||
Length: 1 m; height: 7.3 mm | PFP-100N | |||
Length: 1 m; height: 16 mm | PFP-100N2 | |||
End plate to secure the units on the DIN rail | PFP-M (2 pcs) | |||
Battery for NX/NJ CPU unit | CJ1W-BAT01 | |||
End cover |
End cover for NX1 and NX1P CPU units (Provided with the CPU unit) |
NX-END02 | ||
End cover for EtherCAT communication coupler unit (Provided with the EtherCAT communication coupler unit) |
NX-END01 |
Computer software
Specifications | Order code |
---|---|
Sysmac Studio Lite Edition
2 version 1.23 or higherSame functionality
and supported devices than Sysmac Studio Standard Edition except
for controller. The Lite Edition only supports the NX1, NX1P and
NJ1 machine controllers. |
SYSMAC-LE____
2
Refer
to the Sysmac Studio datasheet (Cat. No. SysCat_I181E) for detailed
information or contact your OMRON representative. |
Size nasıl yardımcı olabiliriz?
Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.
İletişime geçin
Teşekkür ederiz. Talebiniz konusunda en kısa sürede bilgilendirileceksiniz.
Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]
DownloadTeklif isteyin
Talebiniz için teşekkür ederiz. En kısa zamanda size bilgi verilecektir.
Teknik zorluklar yaşamaktayız. Form gönderme işleminiz başarılı olmadı. Lütfen özürlerimizi kabul edin ve daha sonra tekrar deneyin. Detaylar: [details]
DownloadEtherCAT Redundancy
Yedekleme, duruş süresini en aza indirir
EtherCAT ağının bir parçasının bağlantısı kesilse bile Kablo Yedekleme, sürekli bağlantı sağlar.
Bu fonksiyon, makinelerde ve bir kontrolörün hem makine kontrolü hem de emniyet kontrolü sağladığı üretim hattında duraksamaya neden olmadan kesik bağlantı sorununu çözmenize izin verir.
Direct access to SQL Database
Stored procedure
Kayıtlı prosedür nedir?
Kayıtlı prosedür, veritabanı fonksiyonlarından biridir. Bir SQL ifadesi grubu bir veritabanında saklanarak karmaşık işlemlerin tek bir çağrıyla yürütülmesini sağlar. Kontrolörden bir veritabanında kayıtlı prosedürü çağırmak için Kayıtlı Prosedür Çağrısı fonksiyonu sürüm 2.0'a eklenmiştir.
FA ve IT arasında güvenli bağlantı
Sunucu sertifikalarına ve şifreli haberleşmelere dayalı kimlik doğrulama, veritabanı sunucusu ve CPU ünitesi arasında güvenli bağlantı sağlar.*1
Önceki yönteme göre 5 kat daha hızlı veri toplama
Toplu Ekleme, tıpkı bir etkinlik veri kaydedicisi gibi çeşitli veri türlerini uzun süre depolar. Bu sayede, her taramada toplanan verileri analiz ederek hattaki kesintilerin nedenlerini bulabilirsiniz.*1*2
Yapılardan otomatik tablo oluşturma veya tam tersi
Bir yapıdan otomatik olarak veritabanı tablosu oluşturulabilir. Aynı şekilde veritabanı tablosundan bir yapı da otomatik olarak oluşturulabilir. Eşleme süresi azaltılabilir.*1
1. NX701-1□20 ve NX102-□□20 üzerinde kullanılabilir. Yakında NJ□01-□□20 üzerinde de kullanılabilecektir.
2. Birden fazla ekleme işleminin gerçekleştirildiği duruma kıyasla.
3. Tabloları silmek için kayıtlı bir prosedür gereklidir.
İlgili ürünler
-
Sysmac genel amaçlı servo
-
NA Serisi - Sysmac HMI
-
Makine otomasyonuna entegre güvenlik
-
Tek makineden üretim hattına kadar bütüncül emniyet bağlantısı
-
Makine kontrol performansı ve kolaylığı
-
Verimliliğinizi Artırın
Dosya indirme
NJ/NX-series -[EtherCAT]- CKD ABSODEX AX9000TS/TH-U5 driver Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- Hitachi ADV-Series AC Servo Drives Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- Kashiyama Dry Vacuum Pump (E-CAT01 1ch) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD Sensor (PPX series) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD Sensor (WFC series) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- CKD WFK2 Flow sensor Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- MTS Sensors (E-Series) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- PATLITE Beacon (NE-IL) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin
NJ/NX-series -[EtherCAT]- NX-ECC + NX-ILM400 -[IO-Link]- PATLITE Tower (LR6-IL) Bağlantı Kılavuzu
Bu sayfadaki içeriğe için lütfen oturum açın veya kaydol edinin