E6CP-A
E6CP-A
50 mm Çapında Düşük Maliyetli Enkoder
- Mutlak model
- Dış çapı 50 mm
- Çözünürlük: 256 (8 bit)
- Plastik gövdesiyle hafif tasarım
Özellikler ve sipariş bilgisi
Ordering information
Encoders
Note: When connecting to the H8PS, use the E6CP-AG5C-C, which is connected using a connector. It cannot be used on other models.
Accessories (Order Separately)
Specifications
Current consumption1 |
||||
Maximum response frequency2 |
||||
Output code incremented by CW (as viewed from the end of the shaft) |
||||
1 μs max. (Control output voltage: 16 V, Load resistance: 1 kΩ, Output cable: 2 m max.) |
||||
Operating: −10 to 55°C (with no icing), Storage: −25 to 85°C (with no icing) |
||||
200 MΩ min. (at 500 VDC) between current-carrying parts and case |
||||
500 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
||||
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||||
Destruction: 1,000 m/s2 3 times each in X, Y, and Z directions |
||||
Degree of protection3 |
||||
Case: ABS, Main unit: PPS, Shaft: SUS416, Mounting Bracket: Galvanized iron |
||||
Coupling (excluding Connector Models), Servo Mounting Bracket, Hexagonal wrench (excluding Connector Models), Instruction manual |
1. An inrush current of approximately 8 A will flow for approximately 0.3 ms when the power is turned ON.
1. An inrush current of approximately 8 A will flow for approximately 0.3 ms when the power is turned ON.
2. The maximum electrical response speed is determined by the resolution and maximum response frequency as follows:
Size nasıl yardımcı olabiliriz?
Sorularınız veya fiyat teklifi almak için lütfen bizimle iletişime geçin ya da bir talep gönderin.